Home » , , » How To Control Excavator

How To Control Excavator

Excavators are one type of heavy equipment used in excavation or dredging activities. To be an operator or operate heavy equipment types is certainly not be any people or without adequate skill, even a driver's license is required to operate the excavator B2 for this.

But maybe it would not hurt if we are going to lay this heavy equipment excavator want to know how to work on heavy equipment or how to operate it? is it hard? dangerous? or need a powerful force? I do not think too hard to be able to operate excavators this, but it may need concentration and a good experience and would meet the requirements to become a heavy equipment operator.

Basically any type, brand, type and models of each machine has the features and controls. The more features and functionality that are used in the device, the more the knob, lever control, and other control tools that we need to occupy. But fear not, because in general the basis of 'only' to operate the excavator was the same.

Ok, now we will learn how to control excavator.



Basic parts Excavator Controls:

A. Lever / panel next to Right: To operate the bucket and boom.
  • If the lever is pushed forward will lower the boom
  • If the lever is pulled backwards it will raise the boom
  • If the lever is shifted to the left it will close the bucket
  • If the lever is shifted to the right it will open bucket

B. Lever / Panel at Left: To operate the direction of the cabin and arm.
  • If the lever is pushed forward will lower the arm
  • If the lever is pulled backwards it will raise the arm
  • If the lever is shifted to the left it will shift to the left cabin
  • If the lever is shifted to the right then it will shift to the right cabin

C. Lock / Shut-Off Lever (usually located on the far left): To lock lever / panel excavator.
  • If the lever is pulled up it will lock the entire activities of excavator
  • If the lever is pushed down, the excavator can be operated again

D.Lever / pedal Track left and right (located in front): To move forward / backward and turn track excavator.
  • If the lever is pulled together into the back of the excavator will forward
  • If the lever is pulled together into the future it will retreat excavator
  • If the lever is pulled right back to the excavator will turn to the left
  • If the lever is pulled to the rear left the excavator will turn to the right

This is knowledge about how to control excavator in Electronic And Mechanic page. Sorry if there is a shortage.

Advertisment