How To Prevent Auto Glass Not Easy To Blur When the Rain

There is really no way of actually being able to prevent condensation of the air inside the car, but you can try some of the following ways to reduce the likelihood of it.

1. Do not park in places that are too hot

2. If you had to park on a sweltering, open all the windshield, leave on for 3-5 minutes while turning on the AC before running the car.

3. Do not over clean the windshield inside with a damp cloth. But if this was done, try to let the car open after cleaning up the air in the cabin of the car is completely dry.

4. Remove the carpet deck car to be cleaned regularly. Drying was for a few hours to make sure the carpet has dried completely before replacing it.


Causes of Auto Glass Opaque When the Rain

Auto glass can be opaque when it rains caused by condensation. When driving in the rain, we usually immediately shut down all neatly windshield. Because the cabin sealed, the air temperature in the cabin of the car will slowly rise. When the temperature rises, the air (oxygen) will be more moist. While due to the rain, the air temperature outside the car will be even cooler. After a while, the body temperature of the car including the windshield will be the same as the outside temperature (cold).

When moist air in the car touched the cold glass surface, the air will undergo condensation. Condensation is the change in the form of an object into a more solid form (compaction). Previously gaseous air will turn into a liquid (compressed oxygen into water). If the fluid is attached to the glass, the glass must be opaque.

Similarly, this lightweight tips, in addition, the above methods can be applied to all types of glass are prone to condensation, such as the glass in front of the sink or in the bathroom. Thanks for reading of our article, Electronic And Mechanic.

Treatment Of The Car Seat

The interior of the car is not just a place to transport passengers or just a place to put your luggage. The interior will also indicate the level of care you would your car. Car seat is one of the vital elements in the interior of the car. Seat which became part of the cabin is a place where people who you love or your colleagues are in your car. The beauty and cleanliness of the main thing that you should consider. Before discussing the treatment of the car seat, let's understand the type and nature of the car seat.

Treatment Of The Car Seat

Car seats typically consists of three types, upholstery fabric, upholstery spring genuine leather and leather upholstery. Each type has its own properties and have a different way of treatment with the others. Semi-leather upholstery is used in low-end cars for cheap. In addition, this seat is not easily stained and so the treatment is not so difficult. But this seat include hard / stiff, easy to heat, have a chemical scent of synthetic material and easily stretched. Indeed, treatment is not difficult, but it is comparable to the short age of the seat. It is also not convenient to use.

Being genuine leather seats have better properties. This seat has a nice and soft contours. This seat also does not keep the heat even if exposed to sunlight. Even a few seats scratch resistant and fireproof. Only drawback to its price. The latter is the seat fabric. This seat soft textured, there are several variants that have a velvety, soft and comfortable. The disadvantage among others absorb and moldy, save odor, color stubborn stains.

For maintenance of semi-leather upholstery and genuine leather upholstery is almost the same. Prepare the following tools: brush with feathers that are not too hard, dry cloth, chamois, cleaning fluid and vacuum cleaner. First, use a vacuum cleaner to clean the parts that are difficult to reach and rub gently with a wet chamois half evenly. After the cleaning fluid and semportkan prepare the seat and immediately brush slowly. Before the liquid dries, dry immediately with a dry cloth. Do not move the area before you are sure the parts are clean and dry. If there are stubborn stains, doing way over several times. Give moisturizer leather seats and keep it away from direct sun heat.

As for the upholstery fabric, almost the same equipment, is being replaced with a cleaning liquid detergent liquid. Shortly after exposure to liquids seat immediately wash the rest of the liquid with a wet chamois. Furthermore, pour a little detergent and scrub with a brush until the stain is gone. Dry with a vacuum dried under the sun. Spray fragrances to eliminate odor and use the seat cover after a dry seat. Thanks for read article by Electronic And Mechanic.

Tips For Caring Fuel Tank

Care fuel tank is actually very necessary, because if there is damage would be very inconvenient. Therefore, let's look at how to take care of the fuel tank below. The fuel tank is generally made of thin steel with anti-rust coating, the large size of the tank depends on the car each. Gas tank in addition to saving fuel also serves to prevent any other objects to enter the system.

So usually the users many are unaware that the tank can also cause the car becomes problematic. In the fuel tank is equipped with a float, separator and indicators. The tank is made or designed impermeable and sealed, then one way dirt can get into the tank is at the time of refueling, the anticipation of it to choose a filling and good quality fuel.

Tips For Caring Fuel Tank

Some things that can be done to prevent damage to the fuel tank are:

The First Step.
First remove all the fuel from the tank and check the first part of the whole tank from corrosion, cracks, and leaks.

The second step.
Check and see if the fuel hose is possible ingress of dirt or water mixed.

The third step.
Check and note the air vent, to avoid any blockage that would interrupt the flow of fuel to the carburetor.

The fourth step.
Try refueling should be done to the full, to prevent condensation process during cold conditions. Because it can cause rust and moisture under the fuel, which in turn causes blockage of fuel that the engine will be difficult to turn on.

Begin to pay attention to your vehicle's fuel tank for the fuel tank not only serves as a repository, but also keep ensuring the comfort and safety of your driving.
 
Similarly tips from us. continue to update news and knowledge of our articles. hope it is useful.
greetings Electronic  And Mechanic.

Tips on How to Safely Caring For More Durable Car Paint

Almost everyone would dreaming vehicle can still look beautiful and durable. Impression of the car look fabulous views of the outside view is the paint. When a car looks shiny it will create the impression that the car is well maintained. But not a few cars that look dull and unattractive though recently purchased. Actually, the original car paint factory presets have good quality and tested, in general, car paint factory default can last up to a dozen years, but it also depends on the maintenance of the car paint.

Errors car washes often occurs in most people at the time of washing the car, causing scratches smooth to swirl spider would seem obvious luminescence when exposed to sunlight. Dusty road conditions, often made of dust and small sand sticks to the car body. When this happens, the car should be washed because if not, it will cause scratches smooth. For example, contact with the body of your car that has been attached to dust and fine sand will cause abrasion. For this reason, a thorough flushing of the car body in the washing is very important to remove the dirt that sticks to the car body.

Caring For More Durable Car Paint

There is also prefer to take shortcuts in order to paint the car looks shiny polished using drugs. Indeed, in this way the results will quickly be seen directly. But over time the drug was actually going to tarnish polishes car paint itself. Here are some tips to keep your car paint colors to keep it shiny, pretty, not dull or fade easily in a way that is simple yet secure Electronic And Mechanic style. These tips can be applied to any color car paint, car paint colors such as white, black and other colors.



1. Protect Your Car From Weather
Try to park the car in a roof or shade, so avoid the heat of the sun or rain directly. Radiating sunshine constantly can damage the car paint. If you must leave the car for a long time in a place exposed to the sun, should cover the car with a quality car cover.
Similarly, the car caught in the rain if not promptly drained then there will be a source of fungal staining. At night, it is advisable to avoid direct contact between the car with moisture as it can accelerate the onset of rust. If you do not have a closed garage car should be covered with tarpaulin bag or car.

2. Car Wash Routine
Wash your car regularly at least 2 weeks. This is to avoid the accumulation of pollutants, dust and chemicals that may damage the car paint color.

3. Time and Place of the Most Ideal For Car Wash
Currently the most ideal for the car wash is done when the vehicle is cold and carried out in the open and shaded.

4. Use Car Shampoo, Detergent Avoid At Car Wash
If you wash the car, it is advisable to avoid the use of detergent. Of the chemicals in soap detergent may diminish the brilliance of car paint. We recommend using a standard car shampoo and has a great track record for a car wash, but if forced to run out to use soap / shampoo to bathe origin does not contain detergents.

5. Immediately rinse with water Soap At Car Wash
When the car wash soap suds should avoid sticking too long especially in the sun on the car body because it can cause splotches stains on the car paint. Should so do lathering immediately doused with water.

6. Note the Water Pressure At Car Wash
Pressure water spray to wash a car is advisable not too tight, so as not to damage the paint because the water pressure is too tight. The water spray is used to clean the dirt on the body of the car, then simply with moderate pressure.

7. Dry the car with a sponge After Washed
After washing, the car must be dried using a cloth or chamois leather, so that the water does not stick and imprint on the body of the car. Start by wiping the glass and the upper body.

8. Carefully When Wiping
Prudence when wiping the car is important, because when the car in dirty conditions and stick to small particles when wiped it will cause scratches damaging the paint. When wiping use a wet cloth so as not to scratch the particles stick.

9. Wash After the rain
Rainwater still have a salt content, the role of the salt content is causing corrosion so fast cars porous. After the rain immediately wash with car shampoo that contains salt stick soon disappear.

10. Remove Particles Ill Attached to Cars
When painting a car or perform erosion of car paint noticed small particles are usually often still attached to the car. Remember, only one particle can cause car paint scratches. Remove fine dust in the car, you should use a feather duster for cleaning tool that can avoid blisters on the surface of the paint.

11. Avoid liquids that Can Ruin
As far as possible avoid car paint from liquid spills that can damage such as brake fluid, oil fluids and others. When exposed to remove and clean up spills immediately.

12. Use Wax
To protect and maintain the luster of the paint color, you bia coating with wax. The use of wax mobi can protect car paint coating from UV rays and other pollutants. Waxing can dilaukan every 2-3 months to give extra protection to the paint of your car, but do not overdo it.

Caring for Car Dashboard

Dashboard is part of the interior of the car is often exposed to direct sun in a relatively long time. Therefore not infrequently changing conditions dashboard car dull with age.
Dashboard car is the interior of the car most attention at all times. In addition to functioning as a variety of switches and indicator panels, dashboard also a physical boundary between passengers with views outside the windshield.

In addition to sunlight, dust off the dashboard can also make the appearance look dull and often damaging the part. Therefore in order to stay fit despite the condition of the car dashboard are older than 5 years, then this part needs special care.


4 Ways To Caring Car Dashboard

1. Clean the Dust
The simplest treatment for car dashboard that is the way to clean the dust on the surface of the dashboard. This step could be to use a vacuum cleaner, feather duster, or a clean cloth.
Note the curves and angles close to the windscreen as dust and dirt often hide there. If using a vacuum cleaner, choose a portable and has a trunk so that the dust hose tucked in between the dashboard can join sucked. If you use your feather duster and a duster select which have a smooth surface.

2. Use the Little Water
To clean dirt on the dashboard, you can use a microfiber cloth that are sold in stores motor vehicle maintenance. It should be noted, do not rag soaked with water, enough is made moist by sprinkling or water spray.
To the sidelines that are difficult to reach can use an old toothbrush unused. Moisten the tip of the brush with a splash of water and gently brush the dashboard that there are stains. Make sure the soft bristle brush still not that rough as it may scratch the surface of the dashboard.

3. Use Cleansing
After the dashboard surfaces free of dust and stains, spray the cleaner on the interior of this car. Cleansing the dashboard there is a liquid or foam, and select which kind lotion. Avoid cleaners that contain silicone because it can make the surface of the dashboard stripes.
Do not use soap or household cleaners. Dashboard is generally made of a special material that may be sensitive to regular cleaning. Using unsuitable cleaning agents can cause the dashboard dull, discolored, or leave a mark sweep.
Spray enough surface to the dashboard, and use a soft, dry cloth to flatten it to the entire surface. Do not press too hard because of the possibility akanmembuat terbaret dashboard. If it had been rubbed back with a dry cloth to clean amsih new dashboard surface is completely dry.

4. Give Protective Coating
In order for the car dashboard into a sparkling return can we spray cleaners dashboard which has the basic ingredients water base. After that, wipe again using a dry, soft cloth so that the dashboard shiny. Apply protective products dashboard will provide a protective layer against exposure to sunlight, dirt, and dust.

Treating Rearview Mirror

View mirror is required to be there on both motor vehicles motorcycles and cars. In the rainy season as it is today, rearview treatment should not be ignored. Because rainwater can make fast rearview mirror opaque.

Below are some tips on caring rearview you can do yourself:



eliminate mud

Mud easily found when wet road conditions. The mud splashes could be on the vehicle rear view mirror. Therefore, immediately clean the rearview if exposed to splashes of mud. If forgot to clean up the mud dries, wash with soapy water sprinkled into the rearview. Allow a few moments and then rub gently until clean.

Cleaning rust on the rear view mirror

Rust can occur if the rain on the motorcycle rearview motion. You can clean it by removing the rear view mirror (electric car), and then clean the rearview motion cavity with a small brush. You can also use sandpaper if rust is difficult to remove. The way the parts rub with sandpaper gently until clean.

Eliminate water spots

Rainwater that falls on the vehicle and often leaving scars in the form of water spots. If water spots attached to the rearview cleaned with a mixture of vinegar and water, the size ratio is 2: 1.

Diligent cleaning rearview

Once the vehicle splashed by rain, you should immediately wash your vehicle even if only exposed to drizzle. Clean the vehicle using a damp chamois cloth. One thing that is not less important, when the weather is cloudy and it will rain, immediately park your vehicle in a safe place out of the rain water splashes.

Knowledge About The Car Chassis

The chassis is the framework that serves as the support the weight and load of vehicles, engines and passenger. Usually the frame chassis made of iron / steel that serves holding body and engine of a vehicle engine. The main requirement that must be met is that material must have the strength to bear the weight of the vehicle. The chassis also serves to keep the car remains rigid, rigid and do not undergo bending or deformation of time is used.

Type Chassis Type

 

Ladder Frame

Ladder Frame Named because its shape resembles a ladder. Ladder frame chassis which is the oldest and widely used especially for heavy laden vehicles (heavy duty). The chassis is usually made of steel material or model symmetrical beam which is then strengthened with crosmembers and joint. for some designs sometimes Ladder frame given reinforcement iron crosses that maintain structural rigidity.

Monocoque Chassis

In this type Body Chassis serves as a vehicle chassis, so that its shape depends on the model of the vehicle itself, the monocoque chassis or often we hear the name of monocoque chassis, its main strength is in sheet steel sheet / composite incorporated or reinforced. At present many types monocoque chassis applied to light vehicles because it has the advantage of which could save the use of materials other than it can shorten the production process. because it does not need to make additional chassis instead.

Tubular space frame

The chassis type using various beam or pipe assembled into one and almost resembles of construction was the vehicle. The chassis is usually widely applied in the world of car racing, type chassis is very easy to add or in the design and given additional reinforcement. In this type of structure is very important to ensure all areas of triangles (try to observe the horse at home or bridge where all the structures created by the connection triangle model). The strength of the chassis is very dependent on the quality of welded joints of each joint.

Backbone Chassis

The initial idea was to make the front and rear structures are connected by a tube that ran along the frame of the car. Unlike transmission tunnels, backbone chassis is almost entirely rigid structure and can withstand all loads. There are some holes that continuous. Because it is so narrow walls are generally made thicker. Backbone chassis stiffness of the area part of the backbone itself.

Aluminum Space Frame

The chassis of this type were first developed by Audi car company (a subsidiary of the VW Group) together with the aluminum maker Alcoa. Aluminum Chassis Frame made to replace the steel monocoque chassis as to produce a lightweight frame. It is said that the type of Aluminum Space Frame Chassis claimed 40% lighter than steel monocoque frame but 40% more stiffness / Rigid.

How to Wash Cars

Dirty car would be the disease every car. Dirty car causing cool shape of the car body is covered by the dust that enveloped the car. If you are on a long journey with your car and pass through rugged terrain sure your car will be very dirty. Required proper ways to wash the car so that it becomes shiny and components in the car remains safe.
During this often misunderstood one in the right way to wash your car. As an example how to wash a car engine by spraying or in the steam was very dangerous for the car. If by washing like that, then the engine could be a short-circuit or explode.

How to Wash Cars

How to wash a car with the right there are 4 steps in it. That car wash the outside, the inside, Engineering, and Tires. If this entire process is done correctly then your car is certainly more confident for the shot in the Streets. Car is an object made of some material that is plastic, rubber, and metal. Components that most of them use paint materials. As we know the paint is very sensitive chemicals. For the correct way to wash your car would need specific ways in every part of the car so that cleaning becomes maximum. Errors in the little car cleaning can damage the car or washing be not as we expected. Let us refer here we give you tips on how to wash the car properly:

Ways Car Wash Exterior

  1. Make sure you spray water in advance of the hose for 15 seconds, to clean up the remnants of chlorine and chemicals that have the potential to damage the paint
  2. Close the first window and door tightly
  3. Then we start step by washing the car properly is by spraying water from a hose to the car body to clean dust and sand attached to the car body. Squirt it is important, because if we direct the car body scrub dust and sand can scratch the paint.
  4. Buy special cleaners for cars, do not use detergent carelessly because it can damage the paint of your car. Detergents and waxes can also be used to wash the car. Wax will make the car paint shinier.
  5. Then use a clean sponge to wash the car. Car wash with a sponge starting with the roof.
  6. You should avoid washing the car when the sun is directly shining on the car. Because the water droplets will be for sun lens to focus light on the paint.
  7. Wash thoroughly, do not let the soap left on the paint to dry. Because of the chemicals contained in soaps can damage the car paint.
  8. Then wipe the car using a special cloth that is clean and lint. Make sure there is no oil or sand attached to the lap because it has the potential to damage the paint.

How to wash Car Interior

  1. For the correct way to wash your car interior parts, you do not need plenty of water, a little soapy water to rinse the interior of the car using a sponge / cloth. The interior was dirty dirty car is usually caused by stains left by palms, shoes, food, and drinks.
  2. Do not use bleach detergent to clean the inside of the car.
  3. Leave the car door open to facilitate the process of evaporation that occurs.

How to wash Automobile Parts Engines

  1. We are entering the most sensitive part of the car is the engine. How to wash a car properly for this machine parts needed right way and carefully. In it there are parts of the machine that the machine should not be exposed to water as part acu, cable, and sensors. Make sure you clean the machine with the flow of water that is not too hard because part of the spark plug if exposed to water will cause the machine can not be turned on or jammed.
  2. To remove fat or oil attached to the machine, you can use soap or kerosene.

How to Wash Car Tires

  1. Tires are very susceptible to dirt, because tires are automobile components that directly touch the ground. Dirt easily attached to the tire.
  2. To clean the tire rim appropriate use soap. Rim that have a color needs to be washed with soap suitable, while for standard metallic rim. If use soap there are stains that are difficult to clean, use a brush that is fibrous.
  3. If there are stains that are difficult to clean, use a scouring brush.
That's some way to wash your car properly. If you really pay attention to the tips above to wash your car, your car is expected to be clean with no stains and components of your car such as paint and engine durability is maintained. That may Electronic And Mechanic for the correct way to wash this car. It is hoped this car washing tips can be useful for you.